User:BohannonBarefoot771
Your roof is an important structural element of your house, and it also provides necessary protection from the sun and rain: rain, snow, wind, and other weather. Some roofing repairs ought to be addressed with a professional, there are several small issues that could be solved quickly and easily for that experienced do-it-yourself homeowner. A small leak is the best illustration of the kind of quick roof repair that may regularly be handled with a novice, but more serious roof issues should always be seen by a qualified roofer.
Prior to the Repair
Before you attempt to repair a leak, you need to think about a couple of questions. Some overhead leaks are the consequence of fairly minor problems like a torn shingle or a hole in your flashing. These types of damage can generally be repaired with a few basic tools. However, more difficult situations call for a roofer's experience and skill; if you have didn't fix a leak after multiple attempts, call a roofer. Also, ask yourself these questions:
Are there multiple leaks? Are you unable to trace the source from the leak? Are your attempts at repair not holding? Can you see signs of harm to the roofing surface or the interior of your home? Are you uncomfortable working with the types of materials define your homes roof?
For those who have answered yes to any or all of these questions, your roofing repair will require the help of roofing professional and you ought to speak to a contractor immediately.
Quick Roof Repair Tips
Assuming you have had the opportunity to locate the source of the minor leak, and you cannot use whatever structural damage, you may decide to fix the leak yourself. Following a bad storm, it is not uncommon for shingles to become damaged so you will want to prevent future damage and protect your roof and home. You will need to gather several supplies: a tube of roofing cement, aluminum flashing, a pry par, along with a trowel. Begin by cutting the flashing that it is slightly larger than the tear inside your shingle. Carefully pry in the damaged shingle and slide the aluminum flashing under the tear. Apply two or three thick beads of roofing cement to the under-surface of the shingle and press the shingle against the flashing. Finally, apply more roofing cement within the tear to create a better seal.
This quick roof repair should be sufficient until your roof requires more major repairs. Throughout the storm season, you might find yourself having to complete these repairs on multiple occasions. If this is the situation, your shingles are likely showing signs of aging and could have to be replaced entirely. When leaks recur, you should always speak to a roofing expert.
