CarrolColletti745
Most of the office chairs currently available include multiple ergonomic and support features or functional improvements when compared with office chairs of history. The top of the line ergonomic computer or task chairs built today, might seem to possess more levers or adjustments than a small plane. If you own the Piper 4000 office task chair this article is not for you, you might want to locate your manual for additional help locking the tray table within the upright position.
For those who own or want to buy a base to mid-range chair in the future, I really hope their list assists you inside your selection and/or operation of your current or next, chair.
- 1 Pneumatic Seat Height Adjustment:
Most office, computer, task, ergonomic as well as executive chairs offer this function. Quite simply this describes the way the seat height is raised or lowered. A pneumatic cylinder is connected to the chairs mechanism located underneath the seat cushion. This cylinder enables fast and simple adjustment within a specified height range. This adjustment is usually accomplished through the use of a paddle or lever located underneath the seat cushion on either the best or left side of the chair.
- 2 Tilt with Adjustable Tilt Tension:
Manufacturers may sometimes list tilt and tilt tension adjustment as two separate functions. I feel that they are closely related and the fact that you almost can't have one with no other, to become reason to deal with them as one feature. Most types of task, computer and executive chairs feature tilt with adjustable tilt tension. Tilt is what enables the consumer to rock or recline backwards to a set limit based on the chairs mechanism or control plate. The tilt tension adjustment is modified by turning a usually large round knob found beneath the seat toward the front of the chair. (Some chair manufacturers are moving the tilt tension control to a lever or dial elsewhere around the chair, but most are still found in the front.) The tilt tension knob increases or decrease the amount of force required to result in the chair rock or recline backward. Usually, several turns from the tilt tension knob are required to loosen or tighten the strain to a noticeable level.
- 3 Tilt Lock:
This function sounds easy but you would be amazed at how many individuals have difficulty with this, and it is not always their fault. Among the issues with tilt lock isn't that all manufacturers make use of the same lever or place the lever in the same area to control this function resulting in various ways a chairs tilt lock adjustment might be modified. Consulting your chairs owners manual is definitely the very best practice to help familiarize oneself together with your chairs specific controls. Generally some manufactures could use levers or paddles like the ones employed for seat height adjustment to control tilt lock, or many use a single lever or rod that needs pushed in or pulled out to lock or unlock the chairs tilt. Usually, when a chair is locked in a tilt position it cannot be unlocked until the user reclines or tilts back several degrees further relieving pressure from the lock bar or pin so that the chair may be reset to the initial position. Tilt lock can also be used to lock out tilt completely when the chair is in the upright position.
- 4 (2-to-1) Synchro Tilt:
A lot of computer and task chairs offer this selection. Basically, this function allows the backrest to recline two times as fast because the seat cushion or in a 2-to-1 ratio, this allows the consumer to recline while keeping their seat relatively level towards the floor instead of the traditional "rocking chair" type recline.
- 5 Back Height Adjustment:
Many computer, task, ergonomic and drafting chairs now offer this selection. Back height adjustment allows the user to put the backrest's lumbar support area inside a fixed range for customized support. Back height adjustment is usually modified by turning a know on the backrest stem or frame. Once this knob is loosened the backrest can be raised or lowered to the desired position, then your knob is tightened to carry position. Ratchet back height adjustment is also becoming more popular with some newer types of office chairs, this eliminates the use of a knob and it is set or controlled simply by raising or lowering the backrest to the desired level and then locked into position by utilisation of the ratchet style frame stem.
Obviously there are many other chair functions available on the market and based on your individual preference, daily period of time spent in a chair and your intended use you might need or want a workplace chair with increased ergonomic controls or features. If that's the case, please follow the link at the end from the page for more information and a large selection of available ergonomic office chairs. Your office chair is the home away from home, so proper support and comfort are a must.
