LundeNolte120
Your homes roof is a vital structural element of your home, and in addition it provides necessary protection from the elements: rain, snow, wind, and other weather. While most roofing repairs ought to be addressed with a professional, there are some small issues that could be solved quickly for the experienced do-it-yourself homeowner. A little leak is the perfect example of the type of quick roof repair that may regularly be handled with a novice, but more serious roof issues ought to always be seen by a qualified roofer.
Before the Repair
Before you decide to attempt to repair a leak, you need to ask yourself a few questions. Some overhead leaks would be the consequence of fairly minor problems like a torn shingle or perhaps a hole in your flashing. These types of damage can generally be repaired with some basic tools. However, more complicated situations call for a roofer's experience and skill; if you have failed to fix a leak after multiple attempts, call a roofer. Also, ask yourself these questions:
Are there multiple leaks? Are you not able to trace the source of the leak? Are your attempts at repair not holding? Can you see signs of harm to the roofing surface or even the interior of your house? Are you uncomfortable working with the materials define your roof?
If you have answered yes to any or all of these questions, your roofing repair will require the help of roofing professional and you should contact a contractor immediately.
Quick Roof Repair Tips
Assuming you have had the opportunity to locate the source of the minor leak, and you cannot use whatever structural damage, you may choose to fix the leak yourself. After a bad storm, it is not uncommon for shingles being damaged so you will want to prevent future damage and protect your homes roof and home. You'll need to gather several supplies: a tube of roofing cement, aluminum flashing, a pry par, along with a trowel. Begin by cutting the flashing so that it is slightly bigger than the tear inside your shingle. Carefully pry up the damaged shingle and slide the aluminum flashing underneath the tear. Apply 2 or 3 thick beads of roofing cement to the under-surface from the shingle and press the shingle from the flashing. Finally, apply more roofing cement within the tear to create a better seal.
This quick roof repair should be sufficient until your roof requires more major repairs. Through the storm season, you may find yourself having to complete these repairs on multiple occasions. If this sounds like the case, your shingles are most likely showing aging process and could have to be replaced entirely. When leaks recur, it is best to speak to a roofing expert.
